Filter
Top Products
Part IV Composer
81
QQTG0701
Composer
Three ways to record in the COMPOSER
There are three ways to create and record a
rhythm.
Ⅲ
ⅢⅢ
Ⅲ
Simple recording method
Use EASY COMPOSER to quickly create a
unique rhythm just by selecting a pattern for
each part.
Ⅲ
Create a completely new rhythm (page 82)
Compose all the parts of a completely new
rhythm from scratch.
• You can use either realtime recording or step record for
any part of the recording.
Ⅲ
Pattern Copy (page 88)
Copy a preset rhythm or SEQUENCER data to a
COMPOSER memory, edit it as you like, and
then store it as a new rhythm.
Simple recording method
With EASY COMPOSER you can easily create a unique rhythm pattern by selecting a different style for
each part of the rhythm.
1.
On the COMPOSER MENU display, select
EASY COMPOSER.
• The display looks similar to the following.
2.
Use the MEM
∧
and
∨
buttons to select the
memory in which to record your rhythm.
• Select from A-vari 1 to 4, B-vari 1 to 4 and C-vari 1 to 4.
3.
Use the PART ▲ and ▼ buttons to select the
part.
• In the EASY COMPOSER, the new rhythm pattern is
divided into 9 parts, to each of which a style and variation
is assigned.
4.
Use the STYLE
∧
and
∨
buttons to select a
style.
5.
Use the VARI
∧
and
∨
buttons to select the
variation number.
• The number of variations differs depending on the
selected style.
• A part which is set to OFF does not sound. Note that the
“BsDrum&Snare” part cannot be set to OFF.
6.
Repeat steps 3 to 5 to select styles for the
other parts.
7.
Press the SET button.
• The rhythm pattern is played back.
• If you are not satisfied with the rhythm pattern, repeat
steps 3 to 7.
• If you wish to correct the sounds or phrases in your
rhythm pattern, press the EDIT button. The display
changes to the recording display. (Refer to page 83.)
• For playback, refer to page 85.
RECORDING MEMORY-A
Create a memory in the MEMORY A bank.
RECORDING MEMORY-B
Create a memory in the MEMORY B bank.
RECORDING MEMORY-C
Create a memory in the MEMORY C bank.
EASY COMPOSER
Create a rhythm pattern with a simplified
procedure.
PATTERN COPY (page 88)
Copy a rhythm pattern into a memory.
SEQ TO COMPOSER COPY (page 89)
Copy recorded data in the SEQUENCER to
the COMPOSER.
LOAD SINGLE COMPOSER
Recall the desired COMPOSER data from
data saved on a disk. This procedure is the
same as when COMPOSER is selected for
SINGLE LOAD. (Refer to page 93.)
Summary of the COMPOSER menu items
09_Part IV.fm 81 ページ ２００３年５月２０日 火曜日 午後５時２５分