Technics SX-PR54/M Musical Instrument User Manual


 
Part III Sequencer
71
QQTG0701
Sequencer
Quantize
The QUANTIZE function can correct the timing of your performance after it has been recorded. If the
rhythm is slightly out of sync or inexact, it will automatically be corrected to the specified quantize level.
1.
On the SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, select
QUANTIZE.
The display looks similar to the following.
3.
Use the TRACK
and
buttons to specify
the track number.
You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
If ALL is selected, all the tracks are quantized.
4.
Use the FIRST MEAS
and
buttons to
specify the start point (measure number).
5.
Use the LAST MEAS
and
buttons to spec-
ify the end point (measure number).
6.
Use the VALUE
and
buttons to specify the
quantize level.
Select from
q
,
e
,
e
3
,
x
,
x
3
,
r
,
r
3
. (A 3 denotes a triplet-
type note.)
7.
Use the STRENGTH
and
buttons to select
the amount of quantize (%).
100% is a convenient setting. When set to 100%, the per-
formance data is quantized exactly to the level specified
for the VALUE (just). For example, at 50%, the data is
quantized to a point that is half that of the just level. By
this setting, you can attain an effect that is very slightly
off-beat from the rhythm.
8.
Use the WINDOW
and
buttons to specify
the range (%) affected by the quantize setting.
With the increment set to 100 for the VALUE, at a + set-
ting, data close to the just point is corrected, and at a
setting, data far from the just point is corrected. For
example, if set to 30% the quantize function affects data
far from the just point, and if set to +30% the quantize
function affects data close to the just point. +100% is usu-
ally a convenient setting.
The +100% setting and the 100% setting are the same.
Example: When VALUE is set to
q
9.
Press the OK button.
The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
Rhythm as written
in the score
Timing of actual
performance
Quantized
performance
e
100%
50%just
50%
100%
+100%
+50%
+30%
50%
30%
100%
08_Part III.fm 71 ページ 2003年5月16日 金曜日 午後5時41分