Filter
Top Products
27
QQTG0701
About the display
About the display
A large-size display, easy to operate with excellent readability, is used for displaying various information
such as the names of the selected sounds and rhythms etc. and when setting the functions. Let’s take a
look.
• The display illustrations shown in this User’s Manual are examples for the sake of clarification; the actual displays on your instru-
ment may differ from the illustrations.
Normal display (HOME PAGE)
This is the kind of information you see on the dis-
play during a normal performance.
Volume balance
At the bottom half of the normal display, the vol-
ume balance of each part is represented in a
fader illustration and by a number (0 to 127). You
can use the balance buttons below the display to
adjust the volumes.
APC: AUTO PLAY CHORD RT: RIGHT
METR: METRONOME
When setting the volume balance, press the
upper button to increase the volume and the
lower button to decrease it.
• Hold a button down to scroll the volume quickly.
<Auto accompaniment part>
Pressing the OTHER PARTS/TR button will dis-
play the auto accompaniment part setting
screen.
• DRM: DRUMS ACP: ACCOMP
Ⅲ
ⅢⅢ
Ⅲ
MUTE
To mute a part, press both the corresponding
upper and lower buttons at the same time.
• The volume display for a muted part is shown as “MUTE.”
• Pressing either balance button for a muted part will can-
cel the mute function.
Ⅲ
ⅢⅢ
Ⅲ
OTHER PARTS/TR
By the pressing the OTHER PARTS/TR button,
the screen sequentially switches to the respec-
tive volume balance screens of the play part,
auto accompaniment part, playback part (1 to 8),
and playback part (9 to 16). The playback part
(PT) is used to playback recording and song
data.
RIGHT 1 part sound
RIGHT 2 part sound
LEFT part sound
Selected rhythm
Tempo
Volume of each part
OTHER PARTS/TR
MUTE
05_About the display.fm 27 ページ ２００３年５月１９日 月曜日 午後１時３９分