Filter
Top Products
Part III Sequencer
75
QQTG0701
Sequencer
Ⅲ
ⅢⅢ
Ⅲ
Inserting DRUMS data
You can also store DRUMS data on this display.
1.
Specify the point where the new note data will
be stored.
2.
Use the VEL
∧
and
∨
buttons to specify the
velocity (how hard the key is played).
3.
Press the ENTER button to store the data.
• Instead of the ENTER button, you can store data (includ-
ing velocity data) by playing the keyboard. In this case,
the instrument is that specified on the display, regardless
of which key is played.
4.
Repeat steps 1 to 3 to input more DRUMS
data.
Ⅲ
ⅢⅢ
Ⅲ
CYCLE PLAY
You can aurally check the data you are editing by
accessing the CYCLE PLAY display from the
DRUM EDIT display.
• The procedure is the same as for NOTE EDIT.
• If you wish other tracks to be played back, they should be
selected beforehand on the SEQUENCER PLAY display.
(Refer to page 61.)
Copy and paste the recorded data
You can copy and paste specific portions of the recorded data.
Select the function
1.
On the SEQ MENU display, use the SONG
SELECT
∧
and
∨
buttons to select the number
of the song. Then select COPY & PASTE.
• The display looks similar to the following.
2.
On the COPY & PASTE display, select a func-
tion.
3.
Perform the editing procedures. (See below.)
• During the editing procedure, if the indicator for the
TEMPO/PROGRAM is lit, you can use the TEMPO/PRO-
GRAM dial for the editing function.
SONG COPY
Copy all the recording data of a song to a spe-
cific song memory.
1.
On the FROM side, use the SONG
∧
and
∨
buttons to select the song number you wish to
copy from.
2.
On the TO side, use the SONG
∧
and
∨
but-
tons to select the song number to copy to.
3.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
TRACK COPY
Copy the recorded data from specific tracks of a
song.
1.
Specify the track you wish to copy from.
• On the FROM side, use the SONG
∧
and
∨
buttons and
TRACK
∧
and
∨
buttons to specify a track.
• If ALL is selected, all the tracks of the specified song
number will be copied.
2.
Specify the track you wish to copy to (TO
side).
3.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
08_Part III.fm 75 ページ ２００３年５月１６日 金曜日 午後５時４１分