Filter
Top Products
Part IV Composer
82
QQTG0701
Composer
Create a completely new rhythm
Clear the memories and compose a completely new rhythm from scratch.
• You can also use this method when copying a pattern from a preset rhythm or the SEQUENCER.
Prepare to record
1.
On the COMPOSER MENU display, select a
memory in which to record (RECORDING
MEMORY A, B, or C).
• The display looks similar to the following.
2.
Use the buttons below the display to select the
pattern you want to create.
• If the MEM CLR button is pressed, all the current con-
tents of the MEMORY (A/B/C) are erased (a confirmation
display appears).
• You can press the NAMING button and assign a name to
the MEMORY.
• To assign a name to each VARIATION, press the VARI
button and select a number.
3.
On the RECORD MEMORY display, press the
OK button.
• The display looks similar to the following.
4.
Press the CLEAR THE ENTIRE PATTERN
button.
• The display looks similar to the following.
5.
Press the YES button.
• All the data for the selected pattern is erased.
6.
Press the MEASURE SETTING button.
7.
Use the MEASURE
∧
and
∨
buttons to spec-
ify the number of measures in your new
rhythm pattern (1 to 16).
8.
Use the TIME SIGNATURE
∧
and
∨
buttons
to specify the meter of the pattern (1/4 to
8/4).
• When the settings for the MEASURE and TIME SIGNA-
TURE of the INTRO or ENDING patterns are changed,
the Maj and Min settings change at the same time.
9.
Press the OK button.
10.
Press the EXIT button.
09_Part IV.fm 82 ページ ２００３年５月２０日 火曜日 午後５時２５分