Filter
Top Products
Matrix Sends 121
DM2000 Version 2—Owner’s Manual
11 Matrix Sends
Patching Matrix Send Masters to Outputs
The left and right channels of the Matrix Send Masters can be patched to the Slot Outputs,
Omni Outs, or the 2TR Digital Outputs. See “Output Patching” on page 79 for more infor-
mation.
Pre-Fader or Post-Fader Matrix Sends
Matrix Sends can be configured globally as either pre-fader or post-fader on the Matrix
View page. See “Viewing Matrix Send Settings” on page 124 for more information.
Setting Matrix Send Levels
Matrix Send levels can be set by using the SELECTED CHANNEL AUX/MATRIX SEND
LEVEL controls, the faders, or the Encoders.
Using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls
1 Use the LAYER [MASTER] button to select the Master Layer.
2 Use [SEL] buttons 1–20 to select the Bus Outs and Aux Sends, and use the
STEREO [SEL] button to select the Stereo Out.
The Matrix Sends for the left and right channels of the Stereo Out can be set individually.
Use the STEREO [SEL] button to select the left and right channels.
3 Use the LEVEL controls to set the Matrix Send levels.
Using the Faders
Stereo Out Matrix Sends cannot be set using the faders.
1 Use the LAYER [MASTER] button to select the Master Layer.
2 Press the FADER MODE [AUX/MTRX] button to select the Aux/Mtrx
Fader mode.
3 Use the MATRIX SELECT [1–4] buttons to select Matrix Sends 1–4.
4 Use faders 1–20 to set the Matrix Send levels.
Faders 21–24 are inactive because Matrix Send Masters do not feature Matrix Send
controls.
Refer to the legend on the left side of the faders when setting Matrix Send levels.
AUX/MATRIX SEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX 1/MATRIX 1
AUX 5
AUX 9
AUX 2/MATRIX 2
AUX 6
AUX 10
AUX 3/MATRIX 3
AUX 7
AUX 11
AUX 4/MATRIX 4
AUX 8
AUX 12
BANK
DISPLAY
50
40
30
20
15
10
10
5
0
5
70
60
50
40
30
20
15
10
5
0