Filter
Top Products
28 Chapter 2—Control Surface & Rear Panel
DM2000 Version 2—Owner’s Manual
SELECTED CHANNEL Section
The subsections of the SELECTED CHANNEL section are explained below.
ROUTING
A ROUTING DISPLAY button
This button is used to select the following pages: Input Channel Routing, Bus to Stereo, and
Bus to Stereo Library. See “Routing Input Channels” on page 93 and “Sending Bus Outs to
the Stereo Out” on page 109 for more information.
B FOLLOW PAN button
This button determines whether or not the currently selected Input Channel’s pan setting,
and Surround pan setting are applied to the Bus Outs. Its indicator lights up when it’s
pressed. See “Routing Input Channels” on page 93 for more information.
C STEREO button
This button is used to route the currently selected Input Channel to the Stereo Out. Its indi-
cator lights up when it’s pressed. See “Routing Input Channels” on page 93 for more infor-
mation.
D DIRECT button
This button is used to route the currently selected Input Channel to its Direct Out. Its indi-
cator lights up when it’s pressed. See “Routing Input Channels” on page 93 for more infor-
mation.
ROUTING
12
34
56
78
STEREOFOLLOW PAN DIRECT
GATE ON COMP ON
GATE
COMP
RANGE
RATIO
ATTACK
ATTACK
DECAY
RELEASETHRESHOLD
THRESHOLD HOLD
LINK GRAB EFFECT
L
EVEN
R
L
R
EQUALIZER
CHANNEL
COPY
PASTE
EQ ON
AT T.
dB
Hz
kHz
LOW
SELECTED CHANNEL
PHASE / INSERT
INSERT ON
AUX/MATRIX SEND
DELAY
ON
TIME
FB
MIX
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX 1/MATRIX 1
AUX 5
AUX 9
AUX 2/MATRIX 2
AUX 6
AUX 10
AUX 3/MATRIX 3
AUX 7
AUX 11
AUX 4/MATRIX 4
AUX 8
AUX 12
DYNAMICS
PAN/SURROUND
HIGH
BANK
GATE /COMP
GAIN
GAIN
Q
FREQUENCY
dB
Hz
kHz
GAIN
Q
FREQUENCY
dB
Hz
kHz
GAIN
Q
FREQUENCY
dB
Hz
kHz
GAIN
Q
FREQUENCY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
ODD
HIGH MIDLOW MID
10.04.001.00125
ROUTING
12
34
56
78
STEREOFOLLOW PAN DIRECT
DISPLAY
1
2
3 4
5