Filter
Top Products
Format Details
381
DM2000 Version 2—Owner’s Manual
13.4.13 Parameter request (Backup memory)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the value of the specified parameter will be transmit-
ted as a Parameter change.
13.4.14 Parameter change
(Function call Library: store / recall)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified memory/library will be stored/recalled.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
*1) 0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 -
267:AUX12, 384:MATRIX1L - 391:MATRIX4R, 512:STEREO L -
513:STEREO R
Use 256 if the recall destination or store source is a single data
item.
Effect is 0:Effect1 - 7:Effect8, GEQ is 0:GEQ1 - 5:GEQ6
If the store destination is 16383 (0x3FFF), this indicates that the
library data has been changed by a external cause (such as bulk
reception) (only transmitted by the DM2000)
*2) This is also transmitted when a program that is not assigned in
the [Program Change Table] is recalled. (Normally, it is trans-
mitted by Program Change messages.)
*3) Varies with the firmware version.
13.4.15 Parameter change (Function call: title)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the title of the specified memory/library will be
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted
on the [Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
* Varies with the firmware version.
13.4.16 Parameter request (Function call: title)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, a Parameter Change message will be transmitted on
the [Rx CH].
Refer to the above table for the Functions and Numbers.
0eeeeeee ee
Element no. (If ‘ee’ is 0, ‘ee’ is expanded
to two bytes)
0ppppppp pp
Parameter no.
0ccccccc cc
Channel no.
DATA 0ddddddd dd
data
:
:
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0011nnnn 3n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 00000110 06
DM2000
ADDRESS 00000100 04
Backup data
0eeeeeee ee
Element no. (If ‘ee’ is 0, ‘ee’ is expanded
to two bytes)
0ppppppp pp
Parameter no.
0ccccccc cc
Channel no.
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 01111111 7F
Universal
ADDRESS 00010000 10
Function call
00ffffff ff
function
0mmmmmmm mh
number High
0mmmmmmm ml
number Low
DATA 0ccccccc ch
channel High
0ccccccc cl
channel Low
EOX 11110111 F7
End of exclusive
function number channel*1) rx/tx
SCENE RECALL 0x00 0-99, 8192 256 rx/tx*2)
EQ LIB RECALL 0x01 1-200, 8192 0-513 rx/tx
GATE LIB RECALL 0x02 1-128, 8192 0-95 rx/tx
COMP LIB RECALL 0x03 1-128, 8192 0-513 rx/tx
EFF LIB RECALL 0x04 1-128, 8192 0-7 rx/tx
GEQ LIB RECALL 0x05 0-128, 8192 0-5 rx/tx
CHANNEL LIB RECALL 0x06 0-128, 8192 0-513 rx/tx
INPATCH LIB RECALL 0x07 0-32, 8192 256 rx/tx
OUTPATCH LIB RECALL 0x08 0-32, 8192 256 rx/tx
Bus to Stereo LIB RECALL 0x09 0-32, 8192 256 rx/tx
Surround Monitor LIB RECALL 0x0A 0-32, 8192 256 rx/tx
AUTOMIX LIB RECALL 0x0B 1-16 256 rx/tx
SCENE STORE 0x20 1-99 256, 16383 rx/tx
EQ LIB STORE 0x21 41-200 0-513, 16383 rx/tx
GATE LIB STORE 0x22 5-128 0-95, 16383
COMP LIB STORE 0x23 37-128 0-513, 16383 rx/tx
EFF LIB STORE 0x24 xx*3) -128 0-7, 16383 rx/tx
GEQ LIB STORE 0x25 1-128 0-5, 16383 rx/tx
CHANNEL LIB STORE 0x26 2-128 0-513, 16383 rx/tx
INPATCH LIB STORE 0x27 1-32 256, 16383 rx/tx
OUTPATCH LIB STORE 0x28 1-32 256, 16383 rx/tx
Bus to Stereo LIB STORE 0x29 1-32 256, 16383 rx/tx
Surround Monitor LIB STORE 0x2A 1-32 256, 16383 rx/tx
AUTOMIX LIB STORE 0x2B 1-16 256, 16383 rx/tx
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 01111111 7F
Universal
ADDRESS 00010000 10
Function call
0100ffff 4f
title
0mmmmmmm mh
number High
0mmmmmmm ml
number Low
DATA 0ddddddd dd
title 1
:
:
:
0ddddddd dd
title x (depend on the library)
EOX 11110111 F7
End of exclusive
function number size
SCENE LIB TITLE 0x40 0-99,256 (0:response only) 16
EQ LIB TITLE 0x41 1-200 (1-40:response only) 16
GATE LIB TITLE 0x42 1-128 (1-4:response only) 16
COMP LIB TITLE 0x43 1-128 (1-36:response only) 16
EFF LIB TITLE 0x44 1-128 (1-xx(*):response only) 16
GEQ LIB TITLE 0x45 0-128 (0:response only) 16
CHANNEL LIB TITLE 0x46 0-128 (0-1:response only) 16
INPATCH LIB TITLE 0x47 0-32 (0:response only) 16
OUTPATCH LIB TITLE 0x48 0-32 (0:response only) 16
Bus to Stereo LIB TITLE 0x49 0-32 (0:response only) 16
Surround Monitor LIB TITLE 0x4A 0-32 (0:response only) 16
AUTOMIX LIB TITLE 0x4B 1-16 16
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
function number channel*1) rx/tx