Filter
Top Products
Rear Panel 47
DM2000 Version 2—Owner’s Manual
B STEREO OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Stereo
Out signal and are typically connected the stereo
inputs of a 2-track recorder. They are wired pin
1–ground, pin 2–hot (+), and pin 3–cold (–). See “Stereo Out Connectors” on page 104.
C SMALL CONTROL ROOM MONITOR OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Small
Control Room Monitor signal and are typically used
to feed the control room’s nearfield monitors. See
“Control Room Monitoring” on page 158 for more information.
D LARGE CONTROL ROOM MONITOR OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Large
Control Room Monitor signal and are typically used
to feed the control room’s main monitors. See
“Control Room Monitoring” on page 158 for more information.
E 2TR IN ANALOG 1 +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal input
level +4 dB, are typically used to connect the analog stereo
outputs of a 2-track recorder. Signals connected here can
be monitored via the CONTROL ROOM MONITOR
OUT by pressing the CONTROL ROOM [2TR A1] button. In addition, this input can be
patched to Input Channels or Insert Ins. See “2TR Analog INs” on page 65.
F STEREO OUT –10 dBV (UNBAL)
These unbalanced phono connectors, nominal output level
–10 dBV, output the analog Stereo Out signal and are typically
connected to the stereo inputs of a 2-track recorder. See “Stereo
Out Connectors” on page 104.
G 2TR IN ANALOG 2 –10 dBV (UNBAL)
These unbalanced phono connectors, nominal input level
–10 dBV, are typically used to connect the analog stereo outputs
of a 2-track recorder. Signals connected here can be monitored
via the CONTROL ROOM MONITOR OUTs by pressing the
CONTROL ROOM [2TR A2] button. In addition, this input can be patched to Input Chan-
nels or Insert Ins. See “2TR Analog INs” on page 65.
OMNI OUT Section
A
OMNI OUT +4dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal output
level +4 dB, provide eight analog outputs that can be
patched to the following: Bus Outs, Aux Sends, Matrix
Sends, the Stereo Out, Insert Outs, Direct Outs, or Sur-
round Monitor Channels. See “Omni Outs” on page 65.
Female XLR plug
2 (hot)
1 (ground)
3 (cold)
Female XLR plug
2 (hot)
1 (ground)
3 (cold)
Female XLR plug
2 (hot)
1 (ground)
3 (cold)
1/4" TRS phone plug
Tip (hot)
Ring (cold)
Sleeve (ground)
Phono plug
Tip (hot)
Sleeve (ground)
Phono plug
Tip (hot)
Sleeve (ground)
1
1/4" TRS phone plug
Tip (hot)
Ring (cold)
Sleeve (ground)