Filter
Top Products
Panning Matrix Sends 123
DM2000 Version 2—Owner’s Manual
4 To turn Matrix Sends on and off, select the rotary controls, and press
[ENTER].
The rotary controls of Matrix Sends that are turned off, appear gray, and “OFF” appears in
place of the level value. Matrix Send levels can still be changed even when Matrix Sends are
off.
5 To set Matrix Send levels, select the rotary controls, and use the Parameter
wheel or INC/DEC buttons.
ALL NOMINAL: This button resets the levels for all Matrix Sends to nominal.
Panning Matrix Sends
Matrix Sends can be panned on the Matrix Send Pan page. The Matrix Sends for the left and
right channels of the Stereo Out can be panned individually.
1 Use the MATRIX SELECT [DISPLAY] button to select the Matrix Send Pan
page.
2 Use the MATRIX SELECT [1–4] buttons to select Matrix Sends 1–4.
3 Use the cursor buttons to select Output Channel Matrix Send pan controls,
and use the Parameter wheel or INC/DEC buttons to set them.
If the Master Layer is currently selected, [SEL] buttons 1–20 can also be used to select Out-
put Channels.
The currently selected Pan control can quickly be set to center by pressing [ENTER].