Filter
Top Products
56 Chapter 3—Operating Basics
DM2000 Version 2—Owner’s Manual
Encoder Displays
Operation of the Encoder displays depends on the parameter assigned to the
Encoders, as follows.
Pan Mode, Surround L/R, and Surround F/R position
Aux/Mtrx Mode and Alt Layer
Surr LFE Level
Attenuator Parameter
Delay Feedback Gain, Delay Mix & EQ Gain Parameters
On/Off & Pre/Post Parameters
EQ On/Off, Phase On/Off, Insert On/Off, EQ Type, Gate On/Off, Comp On/Off, Aux Send
Pre/Post.
Scene Fade Time Parameters
Other position Hard rightCenter
( indicates at center)
Hard left
( indicates center position)
Other position MaximumNominal
( indicates at nominal)
Minimum (–∞)
( indicates nominal position)
Other position MaximumNominal
( indicates at nominal)
Minimum (–96 dB)
( indicates nominal position)
Other position MaximumNominal
( indicates at nominal)
Minimum (–96 dB)
( indicates nominal position)
Negative value
( indicates 0%, ±0 dB)
Positive value0%, ±0 dB
( indicates at 0%, ±0 dB)
On/Pre Off/Post
Minimum
(Off when Fade Time is minimum)
MaximumOther value