Filter
Top Products
Grouping Output Channel Mutes (ON/OFF) 149
DM2000 Version 2—Owner’s Manual
Grouping Output Channel Mutes (ON/OFF)
The Bus Out, Aux Send, Matrix Send, and Stereo Out mutes can be grouped, allowing you
to mute several Output Channels simultaneously. There are four Output Channel Mute
groups: U, V, W, and X.
1 Use the DISPLAY ACCESS [GROUP] button to locate the Output Mute Group
page.
2 Press the LAYER [MASTER] button.
3 Use the Up/Down cursor buttons to select Mute groups U–X.
The selected group is highlighted by a flashing cursor box.
4 Use the [SEL] buttons to add and remove Output Channels to and from the
selected group.
When an Output Channel is added to a Mute group, its [SEL] button indicator lights up.
ENABLE: These buttons are used to enable and disable the groups.
OUTPUT MUTE MASTER: When this check box is checked, pressing the MASTER
MUTE button turns mute on or off for all channels in the corresponding Mute group.
When this check box is unchecked, the Output Channel [ON] button status mutes or
unmutes the channels in the group.
MASTER MUTE: When the Output Mute Master check box is checked, use this button to
mute or unmute all channels in the corresponding Mute group.
When the Output Mute Master check box is unchecked, pressing the Output Channel [ON]
button mutes or unmutes the channel in the corresponding Mute group (Mute On channels
are turned off and Mute Off channels are turned on).
Output Channel Mute Master
The DM2000 features a Mute Group Master function that enables you to mute all channels
in the Mute group using the MASTER button, much like a Mute group on an analog mixing
console. When this function is enabled, the channel [ON] buttons do not control the chan-
nels in the group collectively.
1 Follow Steps 1–4 described in the “Grouping Output Channel Mutes
(ON/OFF)” section on the previous page, select the Output Mute Master
check box, then press the [ENTER] button to check or uncheck the Output
Mute Master check box.
2
When the Output Mute Master check box is checked, the MASTER MUTE but-
ton in each group mutes or unmutes the channels in the corresponding group.
If the channels are muted by the Mute Master function, the corresponding channel [ON]
button indicators flash. You can assign the MASTER MUTE button function to one of the
USER DEFINED KEYS for convenient operation.