Filter
Top Products
Combining multiple tracks
(Bounce function)
"Bounce" is a function that mixes the performances of the
recorder section and rhythm section (drum kit + bass
program), and records them on one or two tracks. (This is
sometimes called "ping-pong recording.") As an example,
we will explain how recorder tracks 1 – 8 and the rhythm
section can be mixed in stereo, and recorded on tracks 9/10.
1.
Press the status key of the bounce-destination
track (9/10) to make the key light red.
A maximum of two mono tracks or one stereo track can be
selected as the bounce-destination.
2.
Press the [BOUNCE] key.
The [BOUNCE] key will light, and the Bounce function
will be turned on.
3.
Press the PLAY [
R
] key to play back the song, and
adjust the mix balance of each track.
While watching the L/R level meters, adjust the DRUM,
BASS, 1 – 6, and 7/8 channel faders and the MASTER
faders so that the L/R level meters do not clip.
When the Bounce function is on, the signal that passes
through the MASTER fader will be output from the
[OUTPUT] jacks, and at the same time will be sent to the
bounce-destination track(s). Even if you are using the
insert effect or a send/return effect, the sound with the
effect(s) applied will be recorded on the bounce-destination
track(s).
• If you turn the INPUT 1/2 [ON/OFF] keys on, you can mix
the input signals from the [INPUT 1] and [INPUT 2] jacks
into the bounce recording.
• If you select only one mono track as the bounce-
destination, the signal mixed to mono will be recorded.
• If necessary, you can play back all ten tracks, and
bounce them to the desired one or two tracks. For details
refer to the section that follows.
4.
Press the STOP [
P
] key.
5.
Press the ZERO [
U
] key to return to the beginning
of the song, and then hold down the REC [
O
] key
and press the PLAY [
R
] key.
Recording on track 9/10 will begin.
6.
When you have finished recording, press the STOP
[
P
] key.
The Bounce function will be turned off.
You can change the settings of the Bounce function if
necessary.
■
Specifying playback/mute for the recording
track(s)
By default, the bounce-destination recording track(s) will be
muted. If you want to play back all ten tracks simultaneously
while you bounce-record, use the following procedure to
change the internal setting so that the recording track(s) will
also play back.
1.
In the main screen, press the [PROJECT/UTILITY]
key.
The display will indicate "PROJECT."
2.
Use the cursor [
E
]/[
R
] keys to make the display
read "UTILITY BOUNCE," and press the [ENTER] key.
3.
Use the cursor [
E
]/[
R
] keys to make the display
read "BOUNCE REC TR," and press the [ENTER] key.
The current setting will be displayed.
• MUTE :
The recording track(s) will be muted (default
setting).
• PLAY :
The recording track(s) will play back.
4.
Turn the dial to change the setting to "PLAY."
Making settings for the Bounce function
HINT
Executing bounce recording
ZOOM MRS-1044
37
Reference [Recorder]
Combining multiple tracks (Bounce function)