Filter
Top Products
A patch you edited can be stored in any location of the
same send/return effect. You can also store an existing
patch in another location to create a copy of that patch.
1.
Press the [EFFECT] key, and then press the [EDIT]
key.
The currently selected patch can now be edited.
2.
Use the cursor [
Q
]/[
W
] keys to make the display
read "STORE."
3.
Press the [ENTER] key.
A screen will appear in which you can specify the store-
destination patch number.
4.
Turn the dial to select the store-destination patch
number, and press the [ENTER] key.
The display will ask "SURE?"
5.
Press the [ENTER] key.
The patch will be stored, and you will return to the patch
select screen.
• Patches that you store are saved on the hard disk as part
of the project.
• Patch data included in an already existing project can be
loaded into the current project (→ p.84). This is
convenient when you want to use an edited patch in a
different project.
Here's how to edit the name of the patch that is currently
selected for a send/return effect.
1.
Press the [EFFECT] key, and then press the
[REVERB] key or [CHORUS/DELAY] key.
Press the [REVERB] key if you want to edit the name of
the reverb patch, or press the [CHORUS/DELAY] key if
you want to edit the name of the chorus/delay patch. When
either key is pressed, the currently selected patch will be
displayed. If necessary, turn the dial to select the patch
whose name you want to edit.
2.
Press the [EDIT] key, and use the cursor [
Q
]/[
W
]
keys to make the display read "PAT NAM."
The name of the patch will be displayed below "PAT
NAM," and the character currently selected for editing will
blink.
3.
Use the cursor [
E
]/[
R
] keys to move the blinking
area, and turn the dial to change the character.
For details on the characters that can be selected, refer to
p.36.
4.
When you have finished editing the name, use the
cursor [
Q
]/[
W
] keys to make the display read
"STORE," and press the [ENTER] key three times.
The patch will be stored with the edited name, and you will
return to the patch select screen.
Editing the name of a send/return
effect patch
HINT
Storing a send/return effect patch
ZOOM MRS-1044
83
Reference [Effects]
Using the send/return effects