Filter
Top Products
• If you press the [MARK] key at a location where a mark
has not yet been assigned, a new mark will be assigned
to that location.
• If a dot is shown at the lower right of the mark number,
this means that the mark matches the current location.
4.
Turn the dial to select the number of the scene you
saved in step 1 (the scene that will be the starting
point of the mix).
The scene will be assigned to the mark, and at the same
time the selected scene will be recalled. The following
screen shows an example of when mark number 0 is
assigned to scene number 1.
To cancel a scene assignment, turn the dial to make the
display indicate "--".
5.
Press the [EXIT] key.
You will return to the main screen.
6.
Locate the point at which you want the mix to
change, and assign a mark.
7.
While playing back the song from that point, create
the new mix, and save it in a scene.
8.
Use the MARKER [
U
]/[
I
] keys to locate to the
mark you assigned in step 6, and press the [MARK]
key.
A screen will appear, allowing you to assign a scene to the
mark you selected in step 6.
9.
Turn the dial to select the number of the scene you
saved in step 7.
10.
Press the [EXIT] key.
You will return to the main screen.
11.
Using the procedure from steps 6 – 10, assign a
mark to each point at which you want the mix to
change, and assign a scene to each of these
marks.
12.
When you have assigned the desired scenes to the
marks, press the ZERO [
U
] key to locate to the
beginning of the song, and press the PLAY [
R
] key
to play back.
Each time the song reaches the location of a mark to which
a scene has been assigned, that scene will be recalled.
HINT
HINT
ZOOM MRS-1044
53
Reference [Mixer]
Saving/recalling mixer settings (Scene function)