Filter
Top Products
12.
Turn the dial to specify the number of times that the
data will be copied, and then press the [ENTER] key.
The display will indicate "TrCopy SURE?," asking you to
confirm the Copy operation.
13.
To execute the Copy, press the [ENTER] key. To
cancel, press the [EXIT] key.
When you press the [ENTER] key and the copy is
completed, the display will indicate "COMPLETE." If you
then press [EXIT], you will return to the Track Edit menu
of step 2.
If you press the [EXIT] key in step 13, you will return to the
setting screen of step 11. If necessary, you can press the
[EXIT] key repeatedly to step backward through each screen.
The recorded data of an entire track can be copied to
another track. The recorded data at the copy-destination
will be erased, and overwritten by the copy-source data.
1.
In the main screen, press the [V-TAKE] key.
The [V-TAKE] key will light, and a screen will appear in
which you can switch the V-take for each track.
2.
Press the [PROJECT/UTILITY] key.
A menu will appear in which you can select operations that
edit the recorded data of an entire track.
3.
Repeatedly press the [PROJECT/UTILITY] key to
make the display read "COPY TRxx-yy."
In "COPY TRxx-yy," the xx and yy values respectively
indicate the copy-source track number and V-take.
4.
Use the cursor [
E
]/[
R
] keys and the dial to
specify the copy-source track/V-take, and press
the [ENTER] key.
A screen will appear in which you can specify the copy-
destination track/V-take. In "COPY TO TRxx-yy," the xx
value is the copy-destination track number, and the yy
value is the V-take number.
In this screen, the dots of the level meter will be lit or unlit
as follows to indicate whether the currently selected V-take
has already been recorded or not.
5.
Use the cursor [
E
]/[
R
] keys and the dial to
specify the copy-destination track/V-take, and
press the [ENTER] key.
The display will ask "COPY SURE?," asking you to
confirm the copy operation.
6.
To execute the copy, press the [ENTER] key. To
cancel, press the [EXIT] key.
When you press the [ENTER] key and the copy is
completed, you will return to the screen from step 1.
If you press the [EXIT] key, you will return to the setting
screen from step 4. If necessary, you can press the [EXIT]
key to step backward through each screen.
A specified region of recorded data can be moved to the
desired location of a desired track. The previous data at the
Moving a specified region of data to
another location
1
2
3
4
5
6
7
8
9
10
Blinking: the specified V-take
Lit if the currently specified
V-take has already been recorded
Dark: an unrecorded V-take
Lit: an already-recorded V-take
V-takes
Track
Copy-source data
Copy-destination track
Copy
Copying the data of an entire track
ZOOM MRS-1044
40
Reference [Recorder]
Track editing