Filter
Top Products
• When a reverb or chorus/delay patch is selected, you
can press the corresponding key ([REVERB] or
[CHORUS/DELAY]) to switch that effect on/off. (When off,
the key will be dark.)
• For details on track mixer operations, refer to p.49.
3.
To return to the main screen, press the [EXIT] key.
Here's how to edit a reverb or chorus/delay patch.
1.
Press the [EFFECT] key, and then press the
[REVERB] key or [CHORUS/DELAY] key.
Press the [REVERB] key to edit a reverb patch, or press the
[CHORUS/DELAY] key to edit a chorus/delay patch.
When either key is pressed, the currently selected patch
will be displayed. The following screen is an example of
what you see when the [CHORUS/DELAY] key is pressed.
2.
If necessary, turn the dial to select the patch that
you want to edit.
3.
Press the [EDIT] key.
The display will indicate "EDIT," and a screen will appear
in which you can edit the patch. When the [EDIT] key is
first pressed, a screen will appear in which you can select
the effect type of the selected send/return effect (in this
example, chorus/delay).
4.
If you want to change the effect type, turn the dial.
In this example, the chorus/delay effect type has been
changed from "CHORUS" to "DELAY." When the effect
type is changed, the effect parameters will also be different.
When the contents of a patch are modified, the "EDIT"
indicator in the upper part of the display will change to
"EDITED."
5.
Use the cursor [
Q
]/[
W
] keys to select the effect
parameter that you want to edit.
In this example, the TIME parameter of the "DELAY"
effect type has been selected.
6.
Turn the dial to change the setting.
For details on the effect types that can be selected for
reverb or chorus/delay, and on the range of each effect
parameter, refer to the appendix (
→
p.105) at the end of
this manual.
7.
As necessary, repeat steps 5 – 6 to edit other effect
parameters.
8.
When you have finished editing, press the [EXIT]
key.
You will return to the patch select screen.
Be aware that if you return to the patch select screen and
select another patch, your edits will be lost. If you want to
keep the edited patch, refer to the following section.
NOTE
Effect parameter Setting
HINT
Effect type
Patch name Patch number
Editing a send/return effect patch
HINT
ZOOM MRS-1044
82
Reference [Effects]
Using the send/return effects