Filter
Top Products
• These screens are for display only, and contain no items
that can be edited.
• The remaining recordable time is an approximation.
This operation copies a specified project that is saved on
the hard disk.
1.
When the above screen is displayed, turn the dial
to select the copy-source project, and press the
[ENTER] key.
A screen will appear in which you can specify the copy-
destination project number.
2.
Turn the dial to select the copy-destination project
number, and press the [ENTER] key.
The display will ask "SURE?"
3.
To execute the copy, press the [ENTER] key. To
cancel, press the [EXIT] key.
When the copy operation has been completed, you will
return to the main screen with the copy-destination project
selected.
This operation erases the specified project from the hard
disk. When the following screen is displayed, use the dial
to select the project that you want to erase.
To execute the erasure, press the [ENTER] key. To cancel,
press the [EXIT] key. When the erase operation has been
completed, you will return to the main screen.
It is also possible to erase the currently loaded project. In
this case, the lowest-numbered project will automatically
be loaded after the erase operation has been completed.
Once a project has been erased, it cannot be recovered.
Use this operation with care.
This lets you edit the name of the currently loaded project.
When the following screen is displayed, the character
selected for editing will blink.
Use the cursor [
E
]/[
R
] keys to move the blinking area,
and use the dial to change the character.
For details on the characters that can be used, refer to p.36.
The edited name of the project will be updated when the
project is saved.
This setting lets you write-protect the currently loaded
project. When the following screen is displayed, use the
dial to select one of the following two settings.
●
OFF:
Protect is turned off.
●
ON:
Protect is turned on. When protect is on, the
following operations will be impossible.
• Editing or recording on the recorder
• Changing the V-take
• Editing a patch
• Recording or editing a rhythm pattern or the rhythm
Protecting a project (PROJECT
PROTECT)
HINT
Editing the project name (PROJECT
NAME)
NOTE
HINT
Project name Project number
Erasing a project (PROJECT ERASE)
Copy-destination project number
Project name Project number
Duplicating a project (PROJECT
COPY)
NOTE
ZOOM MRS-1044
87
Reference [Project]
Project operations