ZOOM MRS-1044
99
Appendices
Effect type/parameter list
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4TYPE
CHORUS
FLANGER
PHASER
TREMOLO
PDL-WAH
AutoWah
PITCH
RingMod
EXCITER
AIR
WIDE
DELAY
Stereo chorus with clear sound and great spaciousness.
An effect that adds a pronounced character and modulation to the sound.
An effect that adds a swooshing modulation to the sound.
An effect that cyclically varies the volume.
An effect that lets you use an expression pedal to control wah manually.
An effect in which wah is applied according to your playing dynamics.
An effect that modifies the pitch of the original sound.
An effect that produces a metallic resonance.
An effect that gives the sound more focus and spatial definition.
Simulates the effect of air on the room resonance, giving the sound spatial depth.
An effect that produces the sound of a stereo recording made with two mics.
A delay effect with a maximum of 500 mSec.
DEPTH
DEPTH
POSITION
DEPTH
POSITION
FLT TYPE
SHIFT
POSITION
FREQ
SIZE
TIME
TIME
MODULATION/DELAY MODULE
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4TYPE
3BandEQ
HIGH MID LOW LEVEL
Three-band equalizer.
EQ MODULE
SPEAKER
DEPTH
COLOR
-12 – 12
-12 – 12
-12 – 12
1 – 8
Boosts/cuts the high-frequency range.
Boosts/cuts the mid-frequency range.
Boosts/cuts the low-frequency range.
Sets the output level of the module.
HIGH
MID
LOW
LEVEL
Explanation of EQ MODULE parameters
PARAMETER 1TYPE
ZNR
THRSHOLD
Zoom's proprietary noise reduction that minimizes noise when you are not playing.
ZNR MODULE
Explanation of parameter
OFF,1 – 30 Adjusts the sensitivity of ZNR. For best results, set this as high as possible without
allowing the attacks or decays to sound unnatural.
RangeParameter name
THRSHOLD
Explanation of ZNR MODULE parameters
PARAMETER 1TYPE
VOL PDL
MIN VOL
You can use an expression pedal to control the volume.
VOL PDL MODULE
Explanation of parameter
0 – 10 When using an expression pedal as a volume pedal, this specifies the minimum volume.
RangeParameter name
MIN VOL
Explanation of VOL PDL MODULE parameters
RATE
RATE
RATE
RATE
FREQ
POSITION
TONE
RATE
DEPTH
TONE
WET LVL
FB
MIX
FB
COLOR
CLIP
LEVEL
RESO
BALANCE
BALANCE
LowBoost
MIX
DRY LVL
MIX
--
--
--
--
RTM
SENS
--
--
--
--
--
--
1 – 30
0 – 10
1 – 8
1 – 30
0 – 10
CM
br
Ft
St
bC
bS
C1
C2
C3
GS
GW
bC
bS
0 – 10
1 – 4
Adjusts the amount of gain.
Adjusts the tone.
Adjusts the output level of the module.
Adjusts the resonance of the strings.
Adjusts the resonance of the body.
Combo: Simulation of a combo-type cabinet.
Bright Combo: Produces a brighter tone than Combo.
Flat: A cabinet with a flat response.
Stack: Produces the character of a stack-type cabinet.
BassCombo: The sound of a combo-type cabinet for bass.
BassStack: The sound of a stack-type cabinet for bass.
Combo 1: The sound of a combo-type guitar amp with one 12 inch speaker.
Combo 2: The sound of a combo-type guitar amp with two 12 inch speakers.
Combo 3: The sound of a combo-type guitar amp with one 10 inch speaker.
Gt Stack: The sound of a stack-type guitar amp with four 10 inch speakers.
Gt Wall: The sound of multiple stack-type amps placed together.
Bs Combo: The sound of a combo-type bass amp with one 15 inch speaker.
Bs Combo: The sound of a stack-type bass amp with four 6.5 inch speakers.
Adjusts the cabinet resonance of the speaker.
Adjusts the character of the electric-acoustic pre-amp.
Range Explanation of parameterParameter name
Range Explanation of parameterParameter name
GAIN
TONE
LEVEL
TOP
BODY
CABINET
Explanation of PRE AMP/DRIVE MODULE parameters