Filter
Top Products
Switching the level meter
display type
With the MRS-1044's default settings, the level meters
displayed in the center of the screen will indicate the level
of the signals that have passed through the [REC LEVEL]
controls/faders (post-fader). If necessary, however, you can
switch the meters so that they indicate the level of the
signals before they pass through the [REC LEVEL]
controls/faders (pre-fader).
1.
In the main screen, press the [PROJECT/UTILITY]
key.
The display will indicate "PROJECT."
2.
Use the cursor [
E
]/[
R
] keys to make the display
read "UTILITY SYSTEM," and press the [ENTER]
key.
3.
Use the cursor [
E
]/[
R
] keys to make the display
read "UTILITY LVL MET," and press the [ENTER]
key.
4.
Turn the dial to change the setting to "PRE" (pre-
fader).
To return the setting to post-fader, select "POST."
5.
Press the [EXIT] key several times.
You will return to the main screen.
ZOOM MRS-1044
54
Reference [Mixer]
Switching the level meter display type