Displaying RF Auto-Tuning Information 321
To display neighbor information for radio 1 on the directly connected
MAP on port 2, type the following command:
WX1200# display auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC RSSI
------- ----------------- ----
1 00:0b:85:06:e3:60 -46
1 00:0b:0e:00:0a:80 -78
1 00:0b:0e:00:d2:c0 -74
1 00:0b:85:06:dd:00 -50
1 00:0b:0e:00:05:c1 -72
Displaying RF
Attributes
To display the current values of the RF attributes RF Auto-Tuning uses to
decide whether to change channel or power settings, use the following
commands:
display auto-tune attributes
[ap map-num [radio {1 | 2| all}]]
display auto-tune attributes
[ap ap-num [radio {1 | 2| all}]]
To display RF attribute information for radio 1 on the directly connected
MAP on port 2, type the following command:
WX1200# display auto-tune attributes ap 2 radio 1
Auto-tune attributes for port 2 radio 1:
Noise: -92 Packet Retransmission
Count: 0
Utilization: 0 Phy Errors
Count: 0
CRC Errors count: 122
