348 CHAPTER 16: CONFIGURING QUALITY OF SERVICE
40-49 5 5 5 5 5 5 5 5 6 6
50-59 6 6 6 6 6 6 7 7 7 7
60-63 7 7 7 7
Egress QoS Marking Map (cos-to-dscp)
CoS Level 0 1 2 3 4 5 6 7
===============================================================================
Egress DSCP 0 8 16 24 32 40 48 56
Egress ToS byte 0x00 0x20 0x40 0x60 0x80 0xA0 0xC0 0xE0
Displaying a DSCP-to-CoS Mapping
To display the CoS value to which a specific DSCP value is mapped during
classification, use the following command:
display qos dscp-to-cos-map dscp-value
The following command displays the CoS value to which DSCP value 55 is
mapped:
WX1200# display qos dscp-to-cos-map 55
dscp 55 is classified as cos 6
Displaying a CoS-to-DSCP Mapping
To display the DSCP value to which a specific CoS value is mapped during
marking, use the following command:
display qos cos-to-dscp-map cos-value
The following command displays the DSCP value to which CoS value 6 is
mapped:
WX1200# display qos cos-to-dscp-map 6
cos 6 is marked with dscp 48 (tos 0xC0)
