A SERVICE OF

logo

Configuring 802.1X Authentication 455
In the following example, bob.mycorp.com uses Bonded Auth, and the
Bonded Auth period is set to 60 seconds.
WX1200# display dot1x config
802.1X user policy
----------------------
'host/bob-laptop.mycorp.com' on ssid 'mycorp' doing PASSTHRU
'bob.mycorp.com' on ssid 'mycorp' doing PASSTHRU (bonded)
802.1X parameter setting
---------------- -------
supplicant timeout 30
auth-server timeout 30
quiet period 60
transmit period 5
reauthentication period 3600
maximum requests 2
key transmission enabled
reauthentication enabled
authentication control enabled
WEP rekey period 1800
WEP rekey enabled
Bonded period 60
Information for the 802.1X authentication rule for the machine
(host/bob-laptop.mycorp.com) is also displayed. However, the bonded
option is configured only for the user authentication rule. The bonded
option applies only to the authentication rules for users, not the
authentication rules for machines.