328 CHAPTER 16: CONFIGURING QUALITY OF SERVICE
QoS parameters configured in service profiles
CAC mode Call Admission Control, which
regulates addition of new VoIP
sessions on MAP radios. One of
the following modes can be
enabled:
None (the default)
Session-based
set service-profile cac-mode
See the following:
“Call Admission Control” on
page 340
“Configuring Call Admission
Control” on page 343
Static CoS Simple CoS assignment. When
enabled, static CoS assigns the
same CoS value to all traffic on the
service profile’s SSID. Static CoS is
disabled by default.
The default static CoS value is 0.
set service-profile static-cos
set service-profile cos
See the following:
“Static CoS” on page 341
“Configuring Static CoS” on
page 343
Using client DSCP
value
Whether MSS classifies the QoS
level of IP packets based on their
DSCP value, instead of their
802.11 priority.
set service-profile
use-client-dscp
See “Using the Client’s DSCP
Value to Classify QoS Level” on
page 344.
Table 26 QoS Parameters (continued)
QoS Feature Description Configuration Command
