Filter
Top Products
4-2
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
add-snmp-com
add-snmp-com
To add an SNMP community string to the system, use the add-snmp-com command.
add-snmp-com community-string [ro|rw]
Syntax Description
Defaults ro is the default if access mode is not specified.
Command Types Changes configuration
Command Modes Master password protected
Command History
Usage Guidelines The Cisco ONS 15501 supports up to 16 SNMP community strings.
Examples The following example shows how to add an SNMP community string to the system.
edfa > add-snmp-com abcd
Related Commands
community-string Specifies the SNMP community string to be added to the system. The
string can be comprised of any alphanumeric combination. The
maximum number of characters allowed is 21.
[ro|rw] Specifies read only or both read and write access associated with the
community string.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
del-snmp-com Deletes an SNMP community string in the system.
get-snmp-com Displays an SNMP community string in the system.