Filter
Top Products
4-57
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
temp
temp
To display the internal case temperature, use the temp command.
temp
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Examples The following example shows how to display the internal case temperature.
edfa > temp
85.28 (C)
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
resetmeantrig Resets the signal gain and alarm mean level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, internal case temperature
alarm mean level, and internal case temperature alarm trigger level to the
manufacturer’s default settings.
settempmean Sets the internal case temperature alarm mean level.
settemptrig Sets the internal case temperature alarm trigger level.
tempmean Displays the internal case temperature alarm mean level.
temptrig Displays the internal case temperature alarm trigger level.