Filter
Top Products
4-18
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
host-config
host-config
To display or modify the current host name, use the host-config command.
host-config [hostname]
Syntax Description
Defaults Displays the current host name
Command Types Changes configuration
Command Modes Master password protected. User password allows access to the current hostname, but does not allow
modifications.
Command History
Usage Guidelines hostname can have a maximum of 15 characters. Only alphanumeric characters, hyphens, dots, and
underscores should be used.
Examples The following example shows how to modify the current host name.
edfa > host-config ADM-EAST
ADM-EAST >
hostname Specifies the host name.
Release Modification
EDFA 1.0 This command was introduced.