Filter
Top Products
4-52
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
show-trap
show-trap
To display the trap message, use the show-trap command.
show-trap
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Examples The following example shows how to display the trap message.
edfa > show-trap
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
show-trap Hides the trap message.