Filter
Top Products
4-7
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
del-snmp-com
del-snmp-com
To delete an SNMP community string on the system, use the del-snmp-com command.
del-snmp-com community-string
Syntax Description
Defaults None
Command Types Changes configuration
Command Modes Master password protected
Command History
Examples The following example shows how to delete an SNMP community string on the system.
edfa > del-snmp-com abcd
Related Commands
community-string Specifies the SNMP community string to be deleted from the system.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
add-snmp-com Adds an SNMP community string to the system.
get-snmp-com Displays an SNMP community string on the system.