Filter
Top Products
4-13
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
get-snmp-com
get-snmp-com
To display the SNMP community strings in the system, use the get-snmp-com command.
get-snmp-com community-string
Syntax Description
Defaults Displays all SNMP community strings in the system
Command Types Does not change configuration
Command Modes Master password protected
Command History
Examples The following example shows how to display an SNMP community string in the system.
edfa > get-snmp-com abcd
A list of the SNMP community string
=======================================
private
abcd
Related Commands
community-string Specifies the SNMP community string to be displayed.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
add-snmp-com Adds an SNMP community string to the system.
del-snmp-com Deletes an SNMP community string on the system.