Filter
Top Products
4-26
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
neighbor-out
neighbor-out
To display or modify the neighboring equipment details for optical output, use the neighbor-out
command.
neighbor-out [[host link-host] [ip link-ip] [port link-port]] | [disable]
Syntax Description
Defaults If no values are entered, the command displays the current output neighbor details.
Command Types Changes configuration
Command Modes User password protected for read. Master password protected for writes.
Command History
Usage Guidelines In the absence of all arguments, the configured output neighbor NE information is shown.
To include space characters in the host or port, use double quotes (for example, neighbor-out host
“DWDM phoenix 10”). Excluding the disable keyword, whenever a keyword present, the keyword
value must be given. Either host or ip are required while port is optional. The disable keyword deletes
the neighbor NE information.
host link-host Specifies the hostname for the output neighbor. The maximum length
is 32 characters.
ip link-ip Specifies the IP address for the output neighbor.
port link-port Specifies the name for the port on the remote host receiving the output
optical signal. The maximum length is 32 characters.
Note If the host or ip keywords are not present, the port keyword
is not allowed.
disable Deletes the input neighbor information.
Note The disable option is not allowed with any other options.
Release Modification
EDFA 2.0 This command was introduced.