Filter
Top Products
4-15
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
help
help
To display the syntax for an individual command, or to display a list of available user commands, use
the help command.
help [command]
Syntax Description
Defaults Displays a list of available user commands
Command Types Does not change configuration
Command Modes User password protected
Command History
Usage Guidelines If there is a command specified, the corresponding help for that command will be printed. Without any
command specified, a list of all commands will be shown.
Examples The following example shows how to access a list of available user password commands.
edfa > help
STATUS: Alarm, Gain, GainMean, GainTrig, InPwr, InPwrMean, InPwrTrig,
OptOutPwr, OutSigPwr, OutSigPwrMean, OutSigPwrTrig, Ps1, Ps2,
Status, Temp, TempMean, TempTrig
SYSTEM: copyright, ethmode, get-snmp-mgr, help, host-config, ip-config,
logout, neighbor-in, neighbor-out, ntp, ntp-ip, sys-info, time,
timeout, timezone
MAINTENANCE: hide-trap, show-trap
command Specifies the command
Release Modification
EDFA 1.0 This command was introduced.