Filter
Top Products
4-30
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
optoutpwr
optoutpwr
To display the optical output power, use the optoutpwr command.
optoutpwr
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Usage Guidelines The value for optical output power is displayed in dBm.
Examples The following example shows how to display the optical output power .
edfa > optoutpwr
-28.53 (dBm)
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.