Filter
Top Products
4-5
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter 4 Command Reference
boot-bank
boot-bank
To display the active and planned boot bank or modify the active boot bank, use the boot-bank
command.
boot-bank [flash-bank]
Syntax Description
Defaults Displays the active boot bank
Command Types Changes configuration
Command Modes Master password protected
Command History
Usage Guidelines The active boot bank is the Flash bank from which the system has been booted. The planned boot bank
is the Flash bank from which the system will next be booted.
Examples The following example shows how to modify the active boot bank.
edfa > boot-bank 2
The following example shows how to display the active boot bank.
edfa > boot-bank
Active flash bank number: 1
Planned flash bank number: 1
flash-bank Specifies the Flash bank from which the system is booted. This should
be 1, 2, or 3.
Release Modification
EDFA 1.0 This command was introduced.