Filter
Top Products
20
Introducing the R-4
The main screen
The R-4’s main screen provides information about the project and the operational status of the R-4.
You can press the
[DISPLAY] button
to switch the contents of the display.
* For an explanation of the other indications, refer to
“While playing or stopped”
(p. 18).
From the main screen, you can press the
[DISPLAY] button
to make the recordable time area show the
remaining hard disk capacity instead.
While recording
Time counter
Indicates the elapsed time from the beginning of the project you’re recording
until the current location. Indicated in terms of hours: minutes: seconds.
Recordable time
During recording, this indicates the remaining time that recording to the hard
disk can take place. The remaining time will depend on the sampling
frequency (Sample Freq.), sample size (Rec Bit), and recording mode (Rec
Mode) settings. The indication shows how much longer you can record with
the current settings.
Total recording time
Indicates the total time from the beginning of recording to the current
location.
* Even if you record continuously, another new project will be created
automatically when the project reaches 2 GB in size, and recording will
continue. Even for a recording that spans multiple projects in this way, the
elapsed time since you first pressed the [REC] (record) button will be shown
here.
Remaining hard disk
capacity
Indicates the remaining free capacity on the internal hard disk.
Total recording time
Time counter
Recordable time
Remaining hard disk capacity
R-4_e.book 20 ページ ２００５年２月１０日 木曜日 午後３時３６分