Filter
Top Products
60
System settings
Here you can make various settings that apply to the entire system of the R-4 as a whole, such as basic
settings for recording or playback.
The values in boldface are the default values.
* You can’t change the Recording Setup settings during recording or playback.
No. Menu item Summary Refer to
1 Recording Setup
Make various settings related to recording. p. 65
2 Player Setup
Make various settings related to playback. p. 65
3 Speaker
Turn the speaker on/off. p. 65
4 LCD Setup
Make settings related to the display. p. 65
5 System Setup
Make settings to specify how the R-4 operates. p. 65
6 Date & Time
Set the date and time of the R-4’s internal calendar. You can specify
the year, month, and date (day of the week).
p. 66
7
Project Name
The R-4 can automatically assign a name to a project file that is creat-
ed by recording. You can specify how this name will be assigned.
p. 67
8
HDD Utility
Perform various utility commands with respect to the R-4’s internal
hard disk.
p. 68
9
CF Utility
Perform various utility commands with respect to a CompactFlash
card inserted in the R-4.
p. 68
10
Factory Reset
Return the R-4 to the factory-set state.
p. 69
System Menu
1 Recording Setup
Menu item
Value Function
Input Select
Analog
This selects the type of input that is to be recorded.
Choose this setting if you want to record the analog input. This is the most com-
mon setting. Connect your mic or analog audio device to the combo input jacks.
With this setting, any input from the internal mics or the digital input jack will
be ignored.
Int-Mic Choose this setting if you want to record via the internal mics.
Digital
Choose this setting if you want to record via the digital input. The signal from a
digital device connected to the digital input jack will be recorded. With this set-
ting, any input from the internal mics or the line input jacks will be ignored.
The sampling frequency is specified by the
Rec Freq.
setting, and the bit depth
by the
Rec Bit
setting.
Rec Freq.
44.1 kHz,
48.0 kHz,
96 kHz
This selects the sampling frequency for recording.
Higher sampling frequencies allow higher-quality recording but will produce a
larger project file, meaning that there will be less available recording time on the
hard disk.
The 44.1 kHz setting is sufficient when recording audio that falls within the nor-
mally audible range. This is also the most suitable frequency to use if you’re go-
ing to load the recorded file into your computer and create a music CD from it.
You can use the 48 kHz or 96 kHz settings when recording audio that contains
a significant amount of high-frequency content, from instruments such as cym-
bals, or when you want to capture the brightness and transparency of a natural
environment.
Rec Bit
16 bit,
24 bit
This selects the sample size (bit depth) for recording. A larger sample size allows
the sound to be captured in greater detail but will produce a larger project file,
meaning that there will be less available recording time on the hard disk.
Use the 16-bit setting for normal recording. This allows the broadest compatibil-
ity when loading the recorded file into your computer for playback.
Use the 24-bit setting if you want to capture the tonal character and ambience in
greater detail, such as when recording an instrumental or vocal performance.
R-4_e.book 60 ページ ２００５年２月１０日 木曜日 午後３時３６分