Filter
Top Products
33
Recording
●
Input level knobs
Adjust the input level 1 (L) and 2 (R) knobs. If there are channels to which you have not connected anything,
turn their input level knobs to the minimum position.
Refer to
“Adjusting the input level”
(p. 28).
●
Record button [REC]
Press the
[REC] (record) button
to begin recording.
For details on recording-standby, refer to
“Recording-standby” (p. 28)
.
●
Limiter
Turn this
OFF
if you’re recording an audio source whose levels have already been regularized (in contrast
to a live audio source whose levels might change unpredictably), or if you have already checked the
maximum volume levels that are going to occur.
Turn this
ON
if you need to prevent clipping (distortion) that might be caused by unexpectedly loud
volumes or strong attacks.
●
Other settings
If you want to monitor the sound that’s being recorded, connect headphones to the PHONES jack and use
the monitor level knob to adjust the volume.
Adjusting the monitor level knob won’t affect the level of the sound that’s actually being recorded.
To play back the recorded sound, refer to
“Playing back”
(p. 34).
R-4_e.book 33 ページ ２００５年２月１０日 木曜日 午後３時３６分