Filter
Top Products
31
Recording
Here’s how to record from a digital device connected to the R-4’s digital input jack.
fig.digital.eps
●
Connections
Connect your digital device to the
digital input jack
. You’ll need a separately available coaxial-type cable
to connect your device to the R-4’s digital input jack.
fig.input-digital.eps
●
System settings
Press the R-4's
[SYSTEM] button
.
In
1 Recording Setup
, set
Input Select
to
Digital
.
Set the other items in
1 Recording Setup
as appropriate for the
recording you want to make.
* For more about system settings, refer to
“System settings”
(p. 60).
* The R-4 is not able to synchronize to the clock signal of the digital input connector. Regardless of the sampling
frequency that is being input, the incoming digital audio data will be converted to the sampling frequency (Rec
Freq.) and sample size (Rec Bit) that are specified in
Recording Setup
.
●
Record button [REC]
Press the
[REC] (record) button
to begin recording.
For details on recording-standby, refer to
“Recording-standby” (p. 28)
.
●
Other settings
If you want to monitor the sound that’s being recorded, connect headphones to the PHONES jack and use
the monitor level knob to adjust the volume.
Adjusting the monitor level knob won’t affect the level of the sound that’s actually being recorded.
* If you’re recording the digital input, you can’t use the input level knob to adjust the input level.
To play back the recorded sound, refer to
“Playing back”
(p. 34).
Recording digital audio from a digital device
CD/MD player for playback
DIGITAL OUT
DIGITAL IN
R-4_e.book 31 ページ ２００５年２月１０日 木曜日 午後３時３６分