Filter
Top Products
40
Playing back
You can repeatedly play back between two points (A-B) in the project. Simply assign points A and B during
playback, and the playback will repeat between points A and B.
fig.repeat-a
1
Play back the project.
During playback, press the
[A-B REPEAT] button
once. The
[A-B REPEAT]
button
will blink, and that location will be remembered as the starting point
(A) for repeat playback.
* If, after assigning point
A
, you press the
STOP button
before assigning point
B
,
point
A
will be cleared.
fig.repeat-b
2
Press the
[A-B REPEAT] button
once again. The
[A-B REPEAT] button
will
change from blinking to solidly lit, and that location will be remembered as
the end point (B) for repeat playback.
fig.repeat-ab
Playback will automatically repeat between the points you specified in steps 1
and 2.
To cancel repeat playback, press the
[A-B REPEAT] button
when points A and
B have already been assigned. The
[A-B REPEAT] button
will go out, and
repeat playback will be cancelled.
Repeat playback (A-B REPEAT)
A
AB
AB
Please note
* If, after assigning point A, you press the STOP button before assigning point B, point A will be cleared.
* If the song plays all the way to the end after you’ve assigned point A, playback will repeat between point A and the
end of the song.
* If you press the [STOP] button during repeat playback, playback will stop and the repeat region (A-B) settings
will be cleared.
R-4_e.book 40 ページ ２００５年２月１０日 木曜日 午後３時３６分