Filter
Top Products
30
Recording
Here’s how to record an audio source via the R-4’s internal mics.
●
Phantom power switch
Turn this
OFF
.
fig.input-intmic.eps
●
System settings
Press the R-4's
[SYSTEM] button
.
In
1 Recording Setup
, set
Input Select
to
Int-Mic
.
Set the other items in
1 Recording Setup
as appropriate for the
recording you want to make.
* For more about system settings, refer to
“System settings”
(p. 60).
●
Input level knobs
Adjust the input level.
Refer to
“Adjusting the input level”
(p. 28).
Input levels of the
internal mics
are adjusted by
knob 1
(MIC-L) and
knob 2
(MIC-R).
●
Record button [REC]
Press the
[REC] (record) button
to begin recording.
For details on recording-standby, refer to
“Recording-standby” (p. 28)
.
●
Other settings
If you want to monitor the sound that’s being recorded, connect headphones to the PHONES jack and use
the monitor level knob to adjust the volume.
Adjusting the monitor level knob won’t affect the level of the sound that’s actually being recorded.
To play back the recorded sound, refer to
“Playing back”
(p. 34).
Recording from the internal mics
R-4_e.book 30 ページ ２００５年２月１０日 木曜日 午後３時３６分