Filter
Top Products
113
Using the Registration Buttons
Using the Registration Buttons
With the settings of Registration buttons [1]–[12] considered as one set, you
can store the registration set to USB memory or User memory. We recommend
that complex panel settings or Registrations you wish to keep be saved on USB
memory. Furthermore, when you save registrations created on the ATELIER to
USB memory, you can call up their settings on other ATELIER Series instruments
and use the registrations the same way.
1.
Connect your USB memory to the external memory
connector.
If you want to save registration data to a floppy disk, connect the floppy disk
drive to the Ext Drive connector.
Into the floppy disk drive, insert a floppy disk that was formatted by the
ATELIER.
2.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
fig.03-09-3.eps
3.
Touch <go to Save>.
The Registration Save screen appears.
fig.03-09.eps
Saving Registration Sets
If you wish to assign a name
before you save, refer to
“Assigning a Name to a
Registration Set” (p. 111).
AT-900_e.book 113 ページ ２００７年９月７日 金曜日 午前８時４３分