Filter
Top Products
221
Various Other Settings
Various Other Settings
The basic pitch of an instrument is generally considered as the
pitch of the middle A note. The “Master Tune” parameter lets
you adjust this basic pitch to match the pitch of any other
instruments that are playing together with the ATELIER.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Master Tune.
fig.09-24.eps
3.
Touch the Master Tune setting.
fig.09-25.eps
4.
Touch < >< > to change the setting.
5.
Touch <Exit>.
By touching < >, you can restore the default setting
(440.0 Hz).
This setting remains stored in memory even while power is
turned off.
You can adjust the mic echo that will apply to a connected
mic.
Connecting the Microphone (p. 25)
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Mic Echo.
fig.09-24.eps
3.
Touch the Mic Echo setting.
fig.09-26.eps
4.
Touch < >< > to change the setting.
5.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Other Settings
Adjust the Standard Pitch (Master Tune)
Setting
415.3Hz–466.2Hz (0.1 Hz units)
Adjusting the mic echo
Setting
0–12
AT-900_e.book 221 ページ ２００７年９月７日 金曜日 午前８時４３分