Filter
Top Products
159
Using the Lower Keyboard Effectively
Using the Lower Keyboard Effectively
When the Solo voice is assigned to the Upper keyboard or the
Lower keyboard, you can specify how the Solo voice will
respond when more than one key is pressed.
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Upper>.
The Upper Keyboard screen appears.
3.
Touch < >< > to display the Solo Mode.
fig.09-05.eps
4.
Touch the Solo Mode setting (the TOP NOTE,
LAST NOTE, or POLYPHONIC indication).
fig.09-06.eps
5.
Touch < >< > to change the setting.
6.
Touch <Exit>.
When the Solo voice is being played by the Lower keyboard
(i.e., when the Solo [To Lower] button is ON), you can specify
whether the Lower voice and the Solo voice will sound
together (layered), or will sound separately (split).
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Upper>.
The Upper Keyboard screen appears.
3.
Touch < >< > to display the Solo To Lower
Mode.
fig.09-07.eps
4.
Touch the Solo To Lower Mode setting to
switch between “SPLIT” and “LAYER.”
Each time you touch the Solo To Lower Mode setting, it
will alternate between “SPLIT” and “LAYER.”
5.
Touch <Exit>.
Changing How the Solo Voice Responds
Setting
Descriptions
TOP NOTE
The Solo voice will sound the highest
note that is played for the Solo part.
LAST NOTE
The Solo voice will sound the note
that was most recently played for
the Solo part.
POLYPHONIC
The Solo voice will sound all notes
that are played for the Solo part.
Layering the Solo Voice and Lower Voice
Setting
Descriptions
SPLIT
The parts will sound separately.
LAYER
The Lower voice and Solo voice will
sound together.
AT-900_e.book 159 ページ ２００７年９月７日 金曜日 午前８時４３分