Filter
Top Products
224
Various Other Settings
2.
Touch <Tx MIDI Ch. Upper>, <Tx MIDI Ch.
Lower>, <Tx MIDI Ch. Pedal>, <Tx MIDI Ch.
Solo>, <Tx MIDI Ch. Drums> (Tx MIDI Ch.
Drums/SFX), <Tx MIDI Ch. M.Perc> (Tx MIDI
Ch. Manual Percussion) or <Tx MIDI Ch. Cntrl>
(Tx MIDI Ch. Control).
The Control part transmits Expression pedal data and PC
numbers.
3.
Touch < >< > to change the setting.
fig.09-31-a.eps
4.
Touch <Exit>.
MIDI messages for the Solo part will be transmitted only
when the Solo [To Lower] button is ON.
You can adjust the brightness of the display.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Display
Brightness.
fig.09-44.eps
3.
Touch the Display Brightness setting.
fig.09-45.eps
4.
Touch < >< > to change the setting.
Higher values will make the screen brighter.
5.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Setting
1–16
NOTE
Adjusting the Brightness of the Display
Setting
1–3
AT-900_e.book 224 ページ ２００７年９月７日 金曜日 午前８時４３分