Filter
Top Products
120
Using the Registration Buttons
You can simply press the [Load Next] button to successively recall registrations
in the order in which they were saved on the USB memory or user memory.
This function is called “Load Next.”
When you will be performing live, you can save registration sets to USB
memory in the order in which you will be performing. Then while you perform,
you can recall the next registration set easily and smoothly.
There are two [Load Next] buttons. Pressing either one will produce the same
result.
fig.03-01.eps
1.
If you want to load a registration from USB memory,
connect your USB memory to the external memory
connector.
If you want to load a registration from a floppy disk, connect the floppy disk
drive to the Ext Drive connector, and insert the floppy disk containing the
registration into the floppy disk drive.
2.
Press the [Load Next] button.
The first registration saved on the USB memory will be recalled into the
ATELIER.
The following screen appears.
fig.03-24.eps
3.
Press one of the registration [1]–[12] buttons.
The registration will be loaded (recalled into internal memory).
4.
Repeat steps 2 and 3 to successively recall the registration
sets.
Recalling the Order that the Registrations are Saved
(Load Next)
By using the “File Edit” function,
y
ou can modify the order or the
name of the registrations saved
on USB memory or user
memory, or delete an unwanted
registration (p. 111, p. 122, p.
124).
You can also assign the
“Right+Load Next” function to
Regist Shift, and use the foot
switch to operate the Next Load
function.
Button Description
Undo
Return to the
registration that
had been
selected before
you pressed the
[Load Next]
button.
OK
Finalize the
registration. It will
not be possible to
return to the
previous
registration.
Instead of performing step 3,
y
ou can also load the
registration by touching <OK>
in the screen.
AT-900_e.book 120 ページ ２００７年９月７日 金曜日 午前８時４３分