Filter
Top Products
223
Various Other Settings
Various Other Settings
This instrument contains two sound generators: one for GM2/
GS data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for GM2/GS data playback.
However by changing the MIDI IN Mode setting, you can also
control the keyboard sound generator from MIDI In.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the MIDI IN Mode.
fig.09-24.eps
3.
Touch the MIDI IN Mode setting to switch
between “MODE 1” and “MODE 2.”
Each time you touch the MIDI IN Mode setting, it will
alternate between “Mode 1” and “Mode 2.”
* When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound
generator. When the pedal part button is OFF, data received at
the MIDI In connector will control the GS sound generator.
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
When you use the MIDI connectors or the USB connector of
the ATELIER to transmit musical data to external devices, for
each keyboard (Upper, Lower, and Pedal) you can specify the
channel on which your playing will be transmitted as MIDI
messages.
For details refer to “Connecting MIDI Devices” (p. 244).
1.
Touch <System> on the Main screen.
The System screen appears.
fig.09-24.eps
fig.09-30.eps
fig.10-11.eps
MIDI IN Mode
MODE 1
Control the instrument as a GS sound
generator
MODE 2
Channels 5 through 10 and Channels 12, 14,
15 are transmitted to the GS sound generator,
and all other channels are transmitted to the
keyboard sound generator.
Channel
MODE 1 MODE 2
1
GS Solo
2 GS Pedal/GS *
3 GS Lower
4 GS Upper
5–10 GS GS
11 GS Drum/SFX
12 GS GS
13 GS Manual Percussion
14–15 GS GS
16 GS Control
Selecting the MIDI Transmit Channel
AT-900_e.book 223 ページ ２００７年９月７日 金曜日 午前８時４３分