Filter
Top Products
231
Various Other Settings
Various Other Settings
You can restore all of the settings other than the User memory
(p. 82) to their original factory settings.
This function is called “Panel Reset.”
1.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
2.
In the System screen, touch <Utility> to open
the Utility screen.
fig.00-38.eps
3.
In the Utility screen, touch <Panel Reset>.
fig.00-43-1.eps
The confirmation message appears on screen.
fig.00-43-2.eps
If you touch <Cancel>, the Panel Reset will not be
performed, and you will return to the System screen.
4.
Touch <OK>.
The Panel Reset operation will begin, and the settings
will return to the factory-set condition.
Never switch off the power while this operation is in
progress!
fig.00-40-2.eps
To reset only the User memory (p. 82) to its original factory
settings, refer to p. 230. If you want to reset all settings to
their factory-set state, refer to p. 27.
You can also use the following method to open the Panel
Reset confirmation screen.
1.
Touch <Quick Guide> on the Main screen, to
display the Quick Guide screen.
2.
Press the [Harmony Intelligence] button.
The Panel Reset confirmation screen will appear.
Restoring All Settings Other
Than the User Memory to the
Original Factory Settings
NOTE
NOTE
AT-900_e.book 231 ページ ２００７年９月７日 金曜日 午前８時４３分