Filter
Top Products
135
Using the Performance Functions
Using the Performance Functions
You can use the Foot Switch as a dedicated switch for
selecting Registrations in order. The registration will be
switched each time you press the foot switch.
The Regist Shift settings are stored to each individual
Registration Set. When “RIGHT + Load Next” is assigned to
the foot switch and the Load Next function is used to switch
Registration Sets saved to a USB memory or floppy disk, set
the Regist Shift setting to “RIGHT + Load Next” for all saved
Registrations.
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Controller>.
The Controller screen appears.
3.
Touch < >< > to display the Regist Shift.
fig.09-08.eps
4.
Touch the Regist Shift setting (OFF/RIGHT/
LEFT/RIGHT + Load Next).
5.
Touch < >< > to change the setting.
6.
Touch <Exit>.
This setting remains stored in memory even while the power
is turned off.
What is “Load Next”?
You can use the Load Next function to call up
Registrations in the order saved to the USB memory, user
memory, or floppy disk. When you will be performing
live, you can save registration sets to USB memory, user
memory, or floppy disk in the order in which you will be
performing. Then while you perform, you can recall the
next registration set easily and smoothly.
Checking the next registration set
1.
Display the Main screen (p. 31).
2.
Touch the < > icon several times to switch
to < > (Regist).
The Main screen display will switch to the registration.
fig.03-23-2.eps
“Next” will indicate the name of the next registration set.
Using the Foot Switch to Switch
Registrations
Setting
Descriptions
OFF
You can use a function assigned to the
foot switch.
RIGHT
The right foot switch is dedicated to
switching registrations. The function
assigned to the right foot switch cannot
be used.
NOTE
LEFT
The left foot switch is dedicated to
switching registrations. The function
assigned to the left foot switch cannot be
used.
RIGHT +
Load Next
The right foot switch is dedicated to
switching registrations. The function
assigned to the right foot switch cannot
be used.
Selecting the Registration [12] button
and pressing the right foot switch
activates the Load Next function, calling
up the next registration saved to the USB
memory, user memory, or floppy disk.
The Registration Load window appears
in the display. When you then press the
right foot switch again, the Registration
Set is confirmed, and the Registration [1]
button is selected.
Example:
1
→
2
→
3...
→
12
→
Load Next
→
(Next Registration) 1
Setting
Descriptions
AT-900_e.book 135 ページ ２００７年９月７日 金曜日 午前８時４３分