Filter
Top Products
117
Using the Registration Buttons
Using the Registration Buttons
3.
Touch < > < > to select the desired media.
If you want to load from the registration of user memory, select “User.”
If you want to load from the registration of USB memory, select “Ext Memory.”
If you want to load from the registration of floppy disk, select “Disk.”
4.
Touch < >< > to select the Registration that you wish
to load into internal memory.
To cancel operation, touch <Exit>.
5.
Touch <Load>.
The registration data will start being load.
When the Registration has been loaded, the Registration Load screen will
reappear.
1.
If you want to load a registration from USB memory,
connect your USB memory to the external memory
connector.
If you want to load a registration from a floppy disk, connect the floppy disk
drive to the Ext Drive connector, and insert the floppy disk containing the
registration into the floppy disk drive.
2.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
3.
Touch < > < > to select the desired media.
If you want to load from the registration of user memory, select “User.”
If you want to load from the registration of USB memory, select “Ext Memory.”
If you want to load from the registration of floppy disk, select “Disk.”
Loading an Individual Registration
To select a registration from a
folder, refer to “Selecting a
registration from within a
folder” (p. 126).
You can also open the
Registration Load screen by
pressing the [Registration]
button.
AT-900_e.book 117 ページ ２００７年９月７日 金曜日 午前８時４３分