Filter
Top Products
252
Connecting with External Device
When using the remote, point it toward the remote sensor on the ATELIER, and
stay within the allowable operating range described below.
Cautions when using the remote
• You can’t operate two or more of the remote’s buttons simultaneously.
• Even if the remote is within the operating range, it may not work if there
are obstacles between it and the remote sensor, or if the angle is poor.
• Malfunctions may occur if you use the remote near a device that produces
infrared light, or if you use another infrared remote control nearby.
• The battery life will depend on the conditions of use. The operating range
will decrease as the batteries run down. Replace the batteries if this occurs.
• If you won’t be using the remote for an extended period, remove the batteries.
• If a strong light such as a spotlight strikes the remote sensor, the remote
control may respond sluggishly.
Using the Remote
Remote Sensor
Front View
Over View
Operating range for the remote
Distance: 4 meters or less
Angle: 40 degrees or less (to left or right)
Remote
AT-900_e.book 252 ページ ２００７年９月７日 金曜日 午前８時４３分